High Power and Small Size 2W Blue Laser Pointer with Red Copper

This 445nm laser pointer comes with the red-copper housing, which is more resistant to corrosion and heat than copper-nickel alloy, and the conductivity is also better. The internal structure is sturdy, and the maximum power is up to 2W (1800mW / 2500mW is optional). It adopts the powerful Nichia diode, over-temperature protection, and reverse polarity protection. The power/wavelength is customizable, and you can contact us via info@lasersea.com. We will reply to you in 24 hours.

Features
• This high-power laser pointer has good conductivity, heat resistance, and corrosion resistance.
• It comes with internal protection, power buffering, and high-efficient circuit.
• The 1800mW/2500mW is optional, and the laser output is very stable.
• With small size, it's easy and safe to use.

Notes
Although red copper is good at heat dissipation, it is easier to deform, so please avoid the violent collision. Any deliberate vandalism is not in the warranty!

Specifications
• Output power: 1800mW / 2500mW
• Wavelength: 445nm (blue)
• Laser divergence: < 2.0mRad
• Useful life: > 6000 hours
• Housing material: red copper
• Focus mode: focusable
• Output mode: CW
• Laser class: class 4
• Internal protection: temperature control system, circuit board protection, reverse polarity protection, startup buffering
• Operating voltage: DC 3.7V
• Power supply: 1 x 18350 battery
• Operating temperature: 0 ℃ - 50 ℃
• Net weight: 136 g
• Dimensions: ¢ 24 x 84 mm
• Warranty period: 1 year

How to change the output mode?
1) Please half-press the button once to enter the next mode. Five unique output modes cycle in this order: low power > medium power > strobe > high power > emergency SOS > and back to low power.
2) After turning on the laser pointer, it will work in the last operating mode that was in use for more than three seconds.

Electronic Safety Lock
1) To prevent unauthorized use, half-press the switch three times within the first three seconds after you've turned on the laser. It will switch to strobe mode before entering the safety lock.
2) If you need to unlock it, please turn on the laser and wait one second. Next, half-press the switch five times within three seconds and then wait another 2 seconds. The laser will switch to strobe mode, indicating that the laser is unlocked.

Standard Package Contents
• 1 x 1800mW/2500mW Blue Laser Pointer
• 1 x Laser Safety Goggles
• 2 x 18350 Rechargeable Batteries
• 1 x Battery Charger
• 5 x Pattern Caps
• 1 x Warranty Card
• 1 x Package Box